Netview CCTV Tel: 01163800838 or 02036370383

 

 LATEST FIRMWARE INSTALLED        14-DAY RETURNS         TECHNICAL SUPPORT

4K HDMI HDBaseT Extender with USB for DVR/NVR control over single Cat6 / Cat7

Be the first to review this product

Ask a question

NV-AV4KEX100-KVM Professional 4K HDBastT HDMI Extender with USB 2.0

View & Control your CCTV DVR or NVR using 1 extended cable

4KEX100-KVM is a 100m 4K HDBaseT 2.0 Extender which offers the distribution of uncompressed [email protected] UHD video, Analog Stereo, power, RS232 and USB 2.0 up to 100m/330ft over a single Cat6 or better cable

HDMI 2.0 increases the maximum bandwidth to 18.0 Gbit/s. HDMI 2.0 uses 8b/10b encoding for video transmission like previous versions, giving it a maximum video bandwidth of 14.4 Gbit/s. This enables HDMI 2.0 to carry 4K video at 60 Hz with 24 bit/px color depth. 

With USB 2.0 pass-through and USB Host connector in TX, and USB Device connectors in RX, it provides remote DVR / NVR control with a USB mouse, data transmission and USB streaming over distances up to 100m. Additional features include Bi-directional 3.5mm stereo pass throug

The NV-AV4KEX100-KVM provides bi-directional PoE, enabling only 1 power adapter connected at either end to push power to both units. It also supports bi-directional IR pass-through, enabling users to control the source at display location or control the display at source location with ease. Auto equalization built-in ensures transmission of optimal quality video/audio. RS232 pass through supports serial communication

The NV-AV4KEX100-KVM is easy to install. It is space saving and offers an ideal solution for homes, offices, digital entertainment centers, control centers, conference rooms, schools and corporate training environments, which require the extension of HDMI signal over long distances. 

  • Via Cat 6/6a/7 cables, [email protected] output up to 100m, [email protected] up to 100m
  • Via Cat 5e cable, [email protected] output up to 90m, [email protected] up to 100m
  • HDMI 1.4 with [email protected] (chroma sub-sampling 4:2:0 8-bit only) and HDBT 2.0 compliance
  • One way POH, TX (PSE) with PSU to power both TX and RX (PD)
  • USB 2.0 pass through, USB-Host connector built in TX and 4 x USB-Device connector built in RX
  • Bi-directional PoE: only 1 power supply to power both units
  • High-speed USB 2.0, up to 480Mbps, pass through over HDBaseT up to 100m
  • Bi-directional Analog Stereo, and RS232 pass-through over HDBaseT
  • Independent DIP switch for EDID management
  • Does not support HDCP

Good Quality Solid Copper (Min) CAT 6 cable is recommended to be used with this product, Available HERE
Note a USB 2.0 A/B cable will be required to connect to a USB port. Available HERE

ex. vat £179.00 £214.80

Product Questions

No Questions
Write Your Own Review
You're reviewing: 4K HDMI HDBaseT Extender with USB for DVR/NVR control over single Cat6 / Cat7
  • How do you rate this product? *

    Rating  
    Product Rating
    Value

Back to top